Features:
- Half-height blank front cover for a 3500/05 rack opening
- Matched markings 128276-01F and 131151-01 identify the assembly
- Supplied fastening screws secure the cover to the rack face
The half-height panel occupies the front opening without adding a signal path, so the rack face remains mechanically closed where no module panel is fitted.
Its 128276-01F faceplate marking and 131151-01 part number identify two views of the same cover assembly rather than two interchangeable products.
The cover sits ahead of the internal half-height chassis and card guide, leaving those structural pieces as separate items in the rack arrangement.
The Bently Nevada 128276-01F 131151-01 3500/05 Half-Height Blank Front Panel Cover Assembly may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 128276-01F 131151-01 3500/05 Half-Height Blank Front Panel Cover Assembly Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Half-height cover placement
- Opening: One 128276-01F 131151-01 cover occupies one half-height front opening.
- Panel role: The front panel closes the rack face without becoming a signal-processing slot.
- Format limit: Full-height openings require different panel hardware.
How the blank panel is retained
- Alignment: The cover aligns with the half-height opening at the rack front.
- Fastening: Supplied screws pass through the panel mounting points into the rack structure.
- Supply scope: The panel and fasteners should be counted as one cover assembly.
Front cover versus internal adapter parts
- Visible piece: The cover is the visible front piece of the half-height arrangement.
- Internal chassis: The internal chassis remains behind the cover and accepts the module hardware.
- Card guide: The card guide controls internal board alignment and is not part of the blank panel.
Markings to compare before selection
- Face marking: 128276-01F is visible on the physical faceplate.
- Part number: 131151-01 is the Bently Nevada part number for the half-height blank cover.
- Cross-check: Both identifiers should match the item record and receiving rack position.