Features:
- Provides single-slot rack integration for the Orbit 60 machinery protection and condition monitoring architecture.
- Features dual RJ-45 Ethernet ports supporting Modbus TCP/IP, EGD, and PROFINET industrial protocols.
- Delivers front-panel status diagnostic feedback with OK and LINK LED indicators.
Order option 60R/CGW01-00-0 includes the base hardware module configured without hazardous area agency approvals and with no SIL rating.
This gateway interfaces directly with supervisory networks, PLCs, DCSs, and GE Mark VI/VIe controllers to stream machinery measurements, alarms, and system controls.
When mounted in a chassis where ambient temperatures exceed 50°C, forced air convection with a minimum airspeed of 0.5 m/s is required for reliable thermal dissipation.
The Bently Nevada 60R/CGW01 is fully backed by the manufacturer (OEM).
Bently Nevada 60R/CGW01 Communication Gateway Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Real-time machinery condition data extraction from Orbit 60 protection racks to DCS and SCADA networks.
- Direct industrial data exchange with GE Mark VI and Mark VIe turbine automation controllers.
- Point-to-point Ethernet connection to industrial PLCs requiring high-speed PROFINET communications.
- Supports Modbus TCP/IP server configuration over Ethernet with address mapping in the 40000 range.
- Implements Ethernet Global Data (EGD) v3.04 with full backward compatibility for plant automation equipment.
- Operates as a PROFINET device adhering to protocol specification V2.45, Conformance Class B, and Real Time Class 1.
- Provides real-time module status and system communication feedback through front-panel OK and LINK LED indicators.
- Built to withstand harsh industrial operating conditions with a 2-inch incline drop shock resistance rating.
- Features standard operational vibration resistance rated up to 0.35 g from 57 Hz to 500 Hz without isolators.
- Meets EMC Directives 2014/30/EU (EN 61000-6-2 and EN 61000-6-4) and Low Voltage Directive 2014/35/EU (EN 61010-1).
- Holds Class I, Division 2 and Class I, Zone 2 hazardous area approvals including CSA/NRTL/C, ATEX, and IECEx.
- Classified as non-interfering with safety systems, allowing deployment in SIL 2 certified architectures without requiring module SIL rating.