Features:
- Accepts wide range direct current input from +21 Vdc to +32 Vdc for flexible power integration.
- Supports online insertion and removal (hot-swapping) in dual redundant power module configurations.
- Includes an internal field-replaceable fuse for overvoltage and overcurrent circuit protection.
The 60R/PIM01-02-0 is a factory-configured 3U half-height Power Input Module specifically engineered for primary slots in Orbit 60 Series chassis.
It converts incoming external DC utility power into regulated internal distribution, ensuring continuous continuous power supply to backplane buses and signal processing modules.
This module is strictly designed for 3U chassis designs and requires proper utility-side grounding on its dedicated terminal block during installation.
The Bently Nevada 60R/PIM01-02-0 Power Input Module is fully guaranteed and backed by the manufacturer (OEM).
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Providing regulated power input to Orbit 60 protection chassis on critical industrial turbomachinery.
- Delivering uninterrupted redundant power for continuous vibration and condition monitoring systems.
- Supplying system power across hazardous oil and gas, power generation, and petrochemical facilities.
- Consumes a typical 120 W with a maximum system load rating of 180 W in 3U chassis setups.
- Draws a nominal 7.1 Amps at 24 Vdc input with a maximum current capacity of 8.6 Amps.
- Delivers regulated DC power distribution to internal system backplanes with minimal conversion loss.
- Designed for seamless integration with external DIN-rail mounted industrial AC/DC power supply units.
- Operates natively alongside dynamic measurement, condition monitoring, and relay modules in Orbit 60 systems.
- Serves as a half-height module strictly compatible with 3U chassis and non-interchangeable with 6U full-height units.
- Supports remote internal module firmware flashing through Orbit 60 System Interface Module connections.
- Maintains hardware configuration metadata and module identity info within internal non-volatile memory.
- Enables online firmware verifications and diagnostic health status queries via System Configuration Software.