Features:
- Provides 4 dynamic speed input channels supporting magnetic pickups and 3-wire sensors up to 120,000 rpm.
- Features multi-agency hazardous area approvals including CSA, ATEX, and IECEx Zone 2 / Division 2.
- Equipped with 2-wire galvanically isolated inputs to prevent electrical ground loops across speed channels.
Part number 60R/INP06-02-0 designates the standard non-SIL Keyphasor Input Module with multi-certified hazardous location ratings for the Orbit 60 monitoring platform.
The module conditions once-per-turn or multi-event speed signals to provide critical phase timing, keyphasor triggers, and synchronous tracking for machinery protection.
Designed for single-slot installation in Orbit 60 chassis, it requires proper sensor power configuration via software and routing speed signals away from vibration lines in ETB cables.
The Bently Nevada Orbit 60 60R/INP06-02-0 Keyphasor Input Module availability is supported by the manufacturer (OEM).
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Precision phase timing reference generation for 1X and 2X synchronous shaft vibration tracking on turbomachinery trains.
- Rotational speed measurement and multi-event wheel crank angle tracking for industrial reciprocating compressors.
- Backup speed reference switching for continuous phase tracking on critical rotating equipment in petrochemical facilities.
- Operates across Orbit 60 standard 3U, 6U, and distributed chassis architectures via Bridge module interconnections.
- Interfaces directly with 2-wire magnetic speed pickups, 3-wire Proximitor sensors, and 3-wire accelerometers.
- Provides synchronous phase reference timing to PAV, PAS, PAA, PAD, and PVT dynamic input modules across the system.
- Meets IP20 ingress protection rating standards for industrial control cabinet and rack installations.
- Designed for Pollution Degree 2 environments under standard IEC industrial installation conditions.
- Conforms to IEC 60068-2-6 and IEC 60068-2-27 standards for continuous industrial shock and vibration resistance.
- Transmits high-speed digitized phase and speed data across the Orbit 60 backplane at a 102.4 kHz sampling rate.
- Interconnects seamlessly across multiple distributed chassis via Bridge modules to reduce field wiring overhead.
- Routes processed timing reference signals directly to System Interface Modules for plant control system integration.