Features:
- Captures dynamic acceleration, velocity, timebase waveforms, and PeakDemod spectra simultaneously across three orthogonal axes.
- Integrates 2.45 GHz WirelessHART mesh routing with 128-bit AES encryption to ensure secure, uninterrupted field communication.
- Combines dynamic triaxial vibration detection with continuous embedded surface temperature monitoring in a single unit.
The Bently Nevada 70M403 is an industrial-grade Ranger Pro triaxial wireless condition monitoring sensor supplied in a brand new, factory-original condition.
This sensor delivers automated vibration and temperature data directly into Bently Nevada System 1 condition monitoring software via HART IP gateways.
Proper orientation during stud mounting with the internal M6 x 1 mm thread is recommended to align the X, Y, and Z orthogonal measurement axes accurately with machine coordinates.
The Bently Nevada 70M403 is covered by a standard 1-year warranty provided by the manufacturer (OEM).
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Provides continuous triaxial vibration and temperature tracking for balance-of-plant equipment skids in oil and gas refineries.
- Monitors rolling-element bearings in centrifugal pumps, electric motors, cooling tower fans, and blowers within power generation plants.
- Detects early mechanical faults on remote agitators, centrifuges, and small industrial gearboxes in chemical processing facilities.
- Operates on the WirelessHART protocol (IEEE 802.15.4 standard) within the license-free 2.45 GHz ISM radio frequency band.
- Functions as an embedded wireless mesh router to hop measurement packets across neighboring field sensors to the gateway.
- Transmits dynamic timebase waveforms and frequency spectra to Bently Nevada System 1 software using HART IP protocol interfaces.
- Seamlessly interfaces with Emerson WirelessHART Gateways including models 1410S, 1410, and 1420 running supported firmware.
- Supports direct overall vibration and surface temperature data output to third-party PLCs and DCS systems via gateway Modbus connection.
- Requires Bently Nevada System 1 software version 20.2 or higher for full dynamic waveform analysis and PeakDemod processing.
- Certified intrinsically safe for North American Class I, Division 1/Zone 0 (AEx ia IIC T4 Ga) hazardous locations.
- Holds international ATEX and IECEx Zone 0 and Zone 20 intrinsically safe explosion-proof approvals for dust and gas atmospheres.
- Constructed with a rugged IP67-rated 316 stainless steel housing and an impact-resistant PPS enclosure top for harsh environments.