Features:
- 5.5-inch grayscale PanelView Plus 600 display.
- Touch-screen operator input for on-screen navigation.
- EtherNet/IP and RS-232 communication with AC input power.
The grayscale touch interface relies on the runtime to present every command, alarm and data-entry target.
Network and serial connections are both available, so the project and machine records must identify the path in use.
The AC-powered construction and grayscale display separate this terminal from D-suffix and color variants.
Apter Power supports document review, exact-model quotation and procurement for the Allen-Bradley 2711P-T6M20A PanelView Plus 600 Touch Grayscale Terminal.
Allen-Bradley 2711P-T6M20A PanelView Plus 600 Touch Grayscale Terminal Manuals and Support Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Touch objects provide navigation, entry and machine commands.
- The grayscale screen reproduces the visual hierarchy designed in the runtime.
- Calibration must support accurate selection of small or closely spaced targets.
- Acceptance testing should cover alarms, entries and guarded commands.
- EtherNet/IP carries the configured network controller route.
- RS-232 supports the serial connection assigned by the project.
- Addresses, shortcuts and serial settings must be recovered before removal.
- Troubleshooting should begin with the communication path actually used by the runtime.
- The A suffix denotes AC input power.
- Protective earth and connector arrangement must match the original terminal.
- Panel opening, mounting hardware and rear clearance must remain suitable.
- Touch response and live controller data should be validated after power-up.
- Grayscale touch HMIs in established PanelView Plus 600 systems.
- AC-powered operator panels using EtherNet/IP.
- Machines that retain an RS-232 controller or peripheral connection.