Features:
- Four independent H1 paths: Consolidates four engineered segments while keeping their electrical boundaries separate.
- Smart-device information: Carries process values, status and diagnostics over the same scheduled digital network.
- High-density engineering: Supports broad device populations when power, intrinsic-safety and communication limits are proven.
KC3030X1-BA3 is the DeltaV M-series Series 2 Plus H1 card that presents four FOUNDATION Fieldbus ports to the control system.
Each port becomes the interface for a separately powered and terminated field segment, allowing several intelligent instruments to share one digital network.
The card increases I/O density, but usable device count remains an engineering result based on power, intrinsic-safety boundaries, communication scheduling and the installed software baseline.
Apter Power can help confirm the terminal block, software and four-segment design for the Emerson KC3030X1-BA3 DeltaV M-series FOUNDATION Fieldbus H1 Series 2 Plus Card before quotation.
Emerson KC3030X1-BA3 DeltaV M-series Four-Port FOUNDATION Fieldbus H1 Series 2 Plus Card Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Separate segment paths: Four H1 ports let one card serve four independently engineered networks.
- Port isolation: Each segment is isolated from the system and the other ports, creating clear fault boundaries.
- Configured ownership: Device and function-block assignments remain tied to their documented card port.
- Consolidated maintenance: Card diagnostics bring the health of several segments into one DeltaV service position.
- External power: Every H1 segment requires its own approved fieldbus supply arrangement.
- Two-end termination: Correct termination at both network ends is essential for stable communication.
- Practical device limit: Power consumption and intrinsic-safety rules may reduce the population below the headline maximum.
- Scheduled traffic: Function-block execution and macrocycle design must support the connected device workload.
- Software gate: The DeltaV project release is verified before Series 2 Plus hardware is introduced.
- Terminal match: Card and simplex or redundant termination architecture are checked as one interface assembly.
- Per-port proof: Voltage, termination and device visibility are confirmed individually for all four segments.
- Process validation: Values and control actions are traced to the intended instruments before automatic service resumes.
- Process-instrument networks: Connects groups of smart transmitters and valve positioners to DeltaV.
- Cabinet-density projects: Adds four H1 ports in one M-series card position when segment design is complete.
- Fieldbus modernization: Supports controlled migration of documented H1 segments to Series 2 Plus hardware.
- Diagnostic operations: Gives maintenance access to device and segment information through the control system.