Features:
- VE3008 provides 48 MB of documented user memory for this DeltaV MQ Controller.
- 3.0 A internal, non-replaceable is the documented fuse protection for VE3008 as this DeltaV MQ Controller.
- 8-pin RJ45 is the documented primary network for VE3008 as this DeltaV MQ Controller.
The current ordering configuration is VE3008, the DeltaV MQ Controller identified for the DeltaV MQ Controller.
VE3008 performs the documented DeltaV MQ Controller function within the DeltaV M-series controllers architecture. Its operation follows the capabilities and limits assigned to this exact ordering configuration.
Before commissioning, confirm memory and control loading, match carrier and power supply, and back up and validate the controller database.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson VE3008:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Execute DeltaV process-control modules within the MQ controller's documented memory and controller capacity.
- Operate as an M-series control-network node using the primary and redundant RJ45 network connections.
- Support a one-to-one redundant controller configuration when installed with the matching carrier and partner controller.
- The VE3008 MX Controller provides 48 MB of user memory for executing DeltaV control and communication tasks.
- Typical power dissipation is 5 W, with a documented maximum of 7 W for thermal design calculations.
- A 3.0 A internal, non-replaceable fuse protects the controller power circuit under the documented hardware design.
- Configure VE3008 only with the protocol and interface parameters documented for its DeltaV MQ Controller.
- 8-pin RJ45 is the documented redundant network for VE3008 as this DeltaV MQ Controller.
- Power, Error, Active, Standby, network status is the documented controller leds for VE3008 as this DeltaV MQ Controller.
- Review the documented channel and device status after installing or replacing VE3008.
- Use the DeltaV diagnostic indications associated with this DeltaV MQ Controller when isolating a fault.
- Use the DeltaV M-series controllers diagnostic indications assigned to VE3008 when isolating a fault in its DeltaV MQ Controller role.