Features:
- Identifies the MVP50 valve-position control module within the Nexus OnCore family.
- Regulates actuator position through an onboard PID servo loop.
- Uses redundant input and output channels for dependable feedback control.
369B1848G5007 combines associated model of MVP50, control function of Valve position control, and servo function of On-board PID control loop in the Nexus OnCore platform.
It identifies the catalogue configuration associated with the MVP50 valve-position-control function. This role connects the Nexus OnCore MVP50 Valve Position Control Module to the surrounding Nexus OnCore architecture.
Before commissioning, verify both the catalogue and MVP50 nameplate numbers; confirm the required standard or high-speed variant; and match actuator feedback and project settings.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for General Electric 369B1848G5007:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Identifies an MVP50 valve-position module intended for a Nexus OnCore control system.
- Supports closed-loop actuator positioning through the associated MVP50 valve-control hardware.
- Provides the exact catalogue reference needed to identify the required valve-control spare.
- Operates from the 24 VDC supply provided through the Nexus OnCore control system.
- Consumes up to 11.0 W under the specified MVP50 valve-position module configuration.
- Uses redundant I/O paths to carry valve-feedback signals and associated control commands.
- Retains the certified -20 to +50 degrees C ambient range stated on the corresponding module nameplate.
- Requires panel mounting inside a suitable enclosure as part of the completed OnCore installation.
- Match actuator-feedback hardware and project settings during panel integration and commissioning.
- Match the complete catalogue number with the installed unit nameplate before ordering the spare.
- Compare both the 369B part number and the MVP50 nameplate identifier on the existing hardware.
- Confirm whether the application requires the standard or high-speed valve-control variant.