Features:
- Simplex discrete-output mass termination for DeltaV I/O
- 40-pin field connector with B4 hardware keying
- 24 VDC channel wiring within the specified current limit
KC4011X1-BQ1 12P6892X042 provides the field-wiring interface between a compatible DeltaV discrete-output position and a 40-pin mass-termination cable.
B4 keying and the complete 12P6892X042 order identity help technicians distinguish the block from similar terminal hardware during cabinet maintenance.
Safe installation depends on correct pinout, isolated field power, compatible I/O hardware and compliance with the enclosure and hazardous-location requirements.
For KC4011X1-BQ1 12P6892X042 Simplex DO 40-Pin Mass Terminal Block sourcing, Apter Power can help confirm the Emerson identity, B4 key and DeltaV wiring fit.
Emerson KC4011X1-BQ1 12P6892X042 Simplex DO 40-Pin Mass Terminal Block Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Termination type: 40-pin mass terminal block.
- System role: Supports a compatible simplex discrete-output position.
- Hardware key: B4.
- Field supply: 24 VDC nominal.
- Channel rating: 100 mA per output channel.
- Wiring check: Confirm cable pinout before energizing.
- Power isolation: De-energize field circuits before wiring work.
- Enclosure boundary: IP20 equipment requires a suitable cabinet.
- Identity check: Match both KC and 12P numbers.
- Hazardous locations: Follow the approved DeltaV instruction.
- Mass termination: Organizes multi-channel discrete-output cabinet wiring.
- Maintenance replacement: Restores an exact B4-keyed terminal position.
- Marshalling cabinets: Connects compatible DeltaV output hardware to field cabling.