Features:
- S-Series VIM2 identity: Exact model association is stated in Emerson ATEX182.
- Defined LocalBus demand: Uses +5 VDC at 1.4 A.
- Cabinet service envelope: IP20 equipment rated from -40°C to +60°C.
KJ2006X1-BK2 gives procurement and maintenance teams an exact S-Series VIM2 identity for an installed DeltaV cabinet position.
The LocalBus demand and network-potential limit establish two separate electrical checks before the module is commissioned.
Environmental limits and module-level service rules define the conditions for controlled replacement without suggesting compatibility with other VIM products.
For Emerson KJ2006X1-BK2 S-Series VIM2 sourcing, Apter Power can help confirm identity, documentation and quotation requirements.
Emerson KJ2006X1-BK2 S-Series VIM2 Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- LocalBus budget: Include the +5 VDC, 1.4 A demand in the cabinet power calculation before commissioning KJ2006X1-BK2.
- Source ceiling: Do not connect the communications network to a source above 60 VAC or 75 VDC under normal conditions.
- Decision scope: Treat either voltage ceiling as a connection stop condition rather than as an operating target.
- Network boundary: The restriction applies to the communications network connected to the DeltaV Controller, not to an unrelated field circuit.
- Ambient decision: Use KJ2006X1-BK2 only where the enclosure maintains the published -40°C to +60°C operating range.
- Moisture control: The 5%–95% humidity range excludes condensation, so cabinet climate control remains part of the installation.
- Ingress boundary: IP20 requires a suitable enclosure and does not support an exposed field mounting.
- Site qualification: Compare the installed position with the documented shock, vibration and ISA G3 contaminant limits before release.
- System power: The module must not be removed or inserted while system power is energized.
- Internal service: The unit contains no user-serviceable parts and must not be disassembled.
- Calibration: Periodic calibration is not required.
- Hazardous locations: Installation and removal follow the DeltaV S-Series Zone 2 and hardware instructions named by Emerson.
- S-Series VIM2 maintenance: Serves DeltaV installations whose exact equipment record calls for KJ2006X1-BK2.
- Controller-network cabinets: Applies where the connected communications source remains within the stated voltage boundary.
- IP20 installations: Fits controlled enclosures that maintain the published environmental limits.