Features:
- Card-dependent keying: the rotary position follows the installed I/O card
- Field-power interface: the published circuit rating is 35 VDC at 1 A
- Maintenance-free hardware: no calibration or internal field repair is specified
KJ4006X1-BD1 creates the keyed field interface used by a DeltaV S-series I/O assembly.
Its key setting is not a fixed model constant; the corresponding card determines how the rotary mechanism must be arranged.
The powered-removal condition protects the block and field circuit by requiring both the card and connected wiring to be absent.
Apter Power can review KJ4006X1-BD1 card pairing, key position, field-power record, condition evidence, and documentation before quotation.
Emerson KJ4006X1-BD1 S-Series Interface Terminal Block Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Rated circuit: the interface accepts 35 VDC at 1 A field power.
- Power separation: isolate the field source before wiring changes.
- Connection record: preserve conductor destinations and polarity from the installed assembly.
- Scope boundary: the official sheet does not assign a universal channel count or protocol.
- Variable setting: key position follows the installed I/O card.
- Mechanical interlock: completed keying blocks a mismatched card from seating.
- Label pairing: record both terminal-block and card identities.
- Retrofit control: do not copy the key position from a neighboring cabinet.
- Powered insertion: no I/O card may be installed.
- Field wiring: conductors must also be disconnected.
- Calibration: the terminal block requires none.
- Environment: apply the -40 to 70 °C, non-condensing humidity, G3, shock, and vibration limits.
- S-series I/O interfacing: provide the keyed field termination for the assigned card.
- Control-cabinet refurbishment: restore a damaged terminal interface while preserving card and wire identity.
- Hazardous-location panel work: use the component certificate together with the referenced DeltaV installation instructions.
- Planned field-power maintenance: isolate the 35 VDC circuit and document conductors before replacement.