Features:
- Accepts RTD and resistance sensor inputs for temperature measurement.
- LocalBus power requirement is 12 VDC at 160 mA.
- C3 hardware keying supports the documented carrier position.
The current ordering configuration is KJ3225X1-BA2, the DeltaV RTD and Resistance Input Card for M-series Traditional I/O.
It measures compatible RTD and resistance signals for process-temperature and resistance-sensor monitoring within the documented architecture.
Before commissioning, confirm C3 carrier keying, match the sensor type and wiring, and verify lead resistance and channel configuration.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson KJ3225X1-BA2:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Acquire resistance-temperature-detector signals through the documented M-series RTD input channels.
- Measure compatible resistance inputs using the matched RTD or resistance terminal-block arrangement.
- Provide C3-keyed low-level input hardware for process-temperature and resistance measurement in DeltaV.
- Retain the approved channel assignments and device settings when configuring KJ3225X1-BA2 within DeltaV M-series Traditional I/O.
- Verify lead resistance and channel configuration before placing KJ3225X1-BA2 in service.
- Validate the complete KJ3225X1-BA2 configuration before enabling the associated controller or field channels.
- KJ3225X1-BA2 has a documented protection rating of IP20 for this RTD and resistance input card.
- No field-serviceable parts is the documented calibration for KJ3225X1-BA2 as this RTD and resistance input card.
- Review the documented channel and device status after installing or replacing KJ3225X1-BA2.
- Operate KJ3225X1-BA2 only within the temperature and humidity limits published for this RTD and resistance input card.
- KJ3225X1-BA2 operates within the documented -40 to 70 degrees C temperature range for this RTD and resistance input card.
- KJ3225X1-BA2 supports 5 to 95%, non-condensing relative humidity for the documented RTD and resistance input card.