Features:
- 16-pin mass termination is the documented connection for KJ4001X1-CE1 as this 16-pin mass terminal block.
- KJ4001X1-CE1 operates within the documented -40 to 70 degrees C temperature range for this 16-pin mass terminal block.
- KJ4001X1-CE1 supports 5 to 95%, non-condensing relative humidity for the documented 16-pin mass terminal block.
The current ordering configuration is KJ4001X1-CE1, the DeltaV 16-Pin Mass Terminal Block identified for the DeltaV S-series I/O Termination.
KJ4001X1-CE1 performs the documented 16-pin mass terminal block function within the DeltaV mass-termination hardware architecture. Its operation follows the capabilities and limits assigned to this exact ordering configuration.
Before commissioning, verify the connected I/O type, check cable pinout and current rating, and de-energize wiring before removal.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson KJ4001X1-CE1:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Terminate compatible DeltaV field wiring through a 16-pin mass-termination connection.
- Connect documented mass-termination cabling to the matching I/O hardware without changing signal types.
- Provide a keyed terminal interface rated for the documented 30 VDC and 1 A per-channel circuits.
- Match KJ4001X1-CE1 to the exact carrier, terminal, and I/O hardware documented for its DeltaV mass-termination hardware installation.
- Check the complete ordering code and hardware revision before replacing KJ4001X1-CE1 with a similar assembly.
- Confirm the installed DeltaV release supports KJ4001X1-CE1 and its 16-pin mass terminal block configuration.
- Install KJ4001X1-CE1 only with the carrier, terminal, and field-wiring components documented for this 16-pin mass terminal block.
- Verify keying, circuit ratings, and power isolation before connecting or removing KJ4001X1-CE1.
- Complete the documented wiring checks before placing the KJ4001X1-CE1 assembly in service.
- Apply the documented power-removal and hazardous-area precautions before servicing KJ4001X1-CE1.
- Verify field-circuit ratings and the defined safe-state behavior for this 16-pin mass terminal block.
- KJ4001X1-CE1 has a documented per-channel rating of 30 VDC at 1 A for this 16-pin mass terminal block.