Features:
- Analog and HART input: KC3010X1-BA2 acquires transmitter signals and their HART information for DeltaV.
- Keyed termination: The card works with the matching keyed terminal-block arrangement.
- Controlled service handling: Emerson defines power-removal and hazardous-area installation boundaries for the exact model.
KC3010X1-BA2 brings a group of analog transmitter loops into the DeltaV I/O architecture while retaining HART communication for supported field devices.
The card, carrier, terminal block, and field wiring form one installed channel arrangement; buying the card alone does not define the complete termination package.
The exact instruction sheet links model identity, keying, operating limits, and service handling so a replacement can be assessed against the installed loop group.
Apter Power supports documentation, quotation, and procurement for the Emerson KC3010X1-BA2 DeltaV 16-Channel 4–20 mA HART Plus Analog Input Card.
Emerson KC3010X1-BA2 DeltaV 16-Channel 4–20 mA HART Plus Analog Input Card Manuals,Datasheets,Link
Important Notice: Other accessories, modules, and complete system configurations are quoted separately. All prices are shown in USD.
- Terminal keying: The terminal-block rotary keys must match the A6 setting assigned to KC3010X1-BA2 before commissioning.
- Installed assembly: Card, carrier, terminal block, and field wiring must describe the same approved DeltaV I/O arrangement.
- Power state: Field power and system power are controlled separately during connection, removal, or insertion work.
- Hazardous locations: Zone 2 and Class I, Division 2 work must follow the referenced DeltaV installation instructions for the complete assembly.
- Field-power removal: De-energize the field supply through the terminal or carrier before disconnecting the card.
- System-power boundary: Do not insert or remove KC3010X1-BA2 while the system power is energized.
- Repair scope: The manufacturer identifies no user-serviceable parts and no calibration procedure for the card.
- Loop assessment: Complete the required energy-limited I/O loop evaluation before returning the channel group to service.
- Exact identity: Match the complete KC3010X1-BA2 marking rather than assuming another KC3010 revision is interchangeable.
- Separate hardware: Confirm carrier and terminal-block requirements as line items beyond the card itself.
- Key consistency: The replacement card and installed terminal block must preserve the documented key arrangement.
- Document match: Keep the exact-model instruction sheet with the loop and cabinet record used for installation acceptance.
- Analog transmitter acquisition: Bring 4–20 mA field loops into a compatible DeltaV I/O installation.
- HART information: Retain supported digital device information alongside the analog process signal.
- Exact installed-card replacement: Restore a KC3010X1-BA2 position after matching keying, termination, and power-isolation requirements.