Features:
- Provides horizontal mounting and interconnection for supported DeltaV M-series components.
- Integrates controller, system power, and I/O interfaces within the documented carrier architecture.
- Uses the complete VE4050S2K1C1 configuration code to identify the installed assembly.
The current ordering configuration is VE4050S2K1C1, a DeltaV M-series horizontal carrier assembly.
It supplies the mechanical mounting and electrical interconnection foundation used by supported DeltaV controller, system-power and I/O hardware.
Before installation, confirm the assembly code, slot arrangement, connectors, cabinet layout and hardware revision against the project design.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson VE4050S2K1C1:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Builds the horizontal carrier structure for DeltaV M-series controller and I/O installations.
- Supports system-power and controller-interface connections within the documented hardware layout.
- Provides a replacement carrier assembly where existing slot and connector arrangements must be preserved.
- Provides the mechanical and electrical foundation for supported DeltaV M-series hardware.
- Connects carrier-mounted components through the documented controller, power, and I/O interfaces.
- Requires the slot layout and assembly code to match the installed cabinet design.
- Supports only DeltaV M-series components approved for the VE4050S2K1C1 carrier configuration.
- Must match the installed horizontal carrier arrangement and connector architecture.
- Requires project hardware revisions to be checked before substituting another carrier assembly.
- Mounts in the control cabinet according to the documented horizontal carrier layout.
- Requires correct bonding, power isolation, and connector seating before equipment is energized.
- Needs clearance and cable routing preserved for the installed controller and I/O hardware.