Features:
- Left-side carrier identity: The product marking specifies VERT LEFT SIDE CARRIER.
- Separated circuit ratings: LocalBus and field-circuit values are printed independently.
- Exact order control: Model KJ4003X1-BA1 is paired with P/N 12P3831X022 and Rev D.
KJ4003X1-BA1 gives maintenance teams an exact vertical left-side carrier identity for an installed carrier position.
The separate LocalBus and field-circuit markings establish the electrical values that must remain associated with the correct circuit.
The complete model, manufacturer part number and revision marking provide the receiving record needed to avoid suffix or side-position crossover.
For Emerson KJ4003X1-BA1 Vertical Left Side Carrier documentation, quotation and procurement support, Apter Power can help review the complete model, P/N 12P3831X022 and installed carrier position.
Emerson KJ4003X1-BA1 Vertical Left Side Carrier Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Installed side: VERT LEFT SIDE CARRIER makes the left-hand position part of the selection, so housing appearance alone is not enough.
- Identity pair: Match KJ4003X1-BA1 with P/N 12P3831X022 before accepting the carrier for the planned position.
- Revision record: Retain Rev D as a receiving and service detail rather than changing the complete model string.
- Manufacturer check: Use the Fisher-Rosemount Systems marking with the model and part number to resolve a questionable label match.
- LocalBus path: Keep the 12.6 VDC, 15 A marking assigned to the LocalBus circuit when checking the carrier power path.
- AC field path: Use the 250 VAC, 13 A value only when the installed field circuit is the labeled AC configuration.
- DC field path: Use the 30 VDC, 13 A value only for the labeled DC field configuration; it is not an additional LocalBus rating.
- Rating scope: Treat the values as separate component-circuit limits, not as one combined or cabinet-wide power rating.
- Label purpose: Use the product marking to identify the exact carrier, side and named circuits, not as a complete installation procedure.
- Circuit separation: Keep LocalBus and field-circuit values attached to their named circuits throughout the engineering record.
- Revision handling: Retain Rev D as a service detail without turning it into a different product model or side designation.
- Instruction boundary: Stop installation until the applicable carrier manual supplies the conditions that are not stated on the label.
- Vertical carrier assemblies: Use the unit where the installed design calls for the left-side carrier position.
- Exact carrier replacement: Match an installed KJ4003X1-BA1 and P/N 12P3831X022 record.
- LocalBus carrier service: Apply it where the carrier position uses the marked 12.6 VDC LocalBus circuit.
- Field-circuit projects: Retain the separate AC or DC field-circuit marking in the installation record.