- The complete order code includes the high-side output card and standard I/O termination block
- Eight channels support discrete, momentary, and continuous-pulse output modes
- Optical system isolation is built into the documented output architecture
VE4002S1T2B1 is an Emerson high-side discrete output assembly designed for the DeltaV M-series Traditional I/O platform.
It switches eight DC field loads and supports the documented momentary and pulse-output functions through the standard termination arrangement.
Before installation or replacement, verify the complete order code, carrier and terminal block, field voltage, per-channel and total load, output mode, protection, and saved DeltaV configuration.
Availability, condition, price, and shipping time for VE4002S1T2B1 are confirmed during quotation.
Emerson VE4002S1T2B1 8-Channel 24 V DC High-Side Discrete Output Assembly Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Channels can be configured for standard discrete output service
- Momentary output duration is adjustable from 100 ms to 100 s
- Continuous-pulse timing uses a 100 ms–100 s base with 5 ms resolution
- Maximum off-state leakage is 1.2 mA
- Load-state verification must account for the documented leakage current
- Field devices must be compatible with the high-side switching arrangement
- The output circuitry is optically isolated from the DeltaV system
- The documented isolation boundary is factory tested at 1500 V DC
- Field-circuit power is separate from the 12 V DC LocalBus supply
- 24 V DC solenoid and relay control in DeltaV process systems
- Momentary actuator commands using configured output duration
- Continuous pulse outputs for compatible low-frequency field loads