Features:
- Redundant I/O interface termination is the documented terminal role for KJ4006X1-BK1 as this S-series redundant interface terminal block.
- KJ4006X1-BK1 operates within the documented -40 to 70 degrees C temperature range for this S-series redundant interface terminal block.
- KJ4006X1-BK1 supports 5 to 95%, non-condensing relative humidity for the documented S-series redundant interface terminal block.
The current ordering configuration is KJ4006X1-BK1, the DeltaV S-series Redundant Interface Terminal Block identified for the DeltaV S-series I/O Termination.
KJ4006X1-BK1 performs the documented S-series redundant interface terminal block function within the DeltaV S-series Traditional I/O architecture. Its operation follows the capabilities and limits assigned to this exact ordering configuration.
Before commissioning, set the correct hardware key, verify the matched redundant card type, and de-energize before rewiring.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson KJ4006X1-BK1:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Terminate the two interface cards used in a documented redundant S-series I/O assembly.
- Provide a keyed field-wiring interface for the exact I/O card type installed above the terminal block.
- Support redundant I/O cabinet construction where the interface cards and field wiring match the BK1 terminal design.
- Match KJ4006X1-BK1 to the exact carrier, terminal, and I/O hardware documented for its DeltaV S-series Traditional I/O installation.
- Set for the installed I/O interface is the documented hardware key for KJ4006X1-BK1 as this S-series redundant interface terminal block.
- Check the complete ordering code and hardware revision before replacing KJ4006X1-BK1 with a similar assembly.
- Install KJ4006X1-BK1 only with the redundant DeltaV S-series I/O interface and carrier hardware specified for the cabinet.
- Match the terminal-block hardware key to the installed redundant I/O interface before connecting field wiring.
- De-energize the associated I/O assembly and verify terminal identification before removing or replacing the block.
- Isolate cabinet and field power before handling KJ4006X1-BK1 or changing terminal wiring.
- Verify field-circuit ratings, polarity, and grounding against the connected redundant I/O interface documentation.
- Restore service only after confirming secure wiring, correct keying, and both redundant I/O paths.