Features:
- Accepts one 4-20 mA analog input from a compatible process instrument.
- Carries HART communication on the channel for supported device information and maintenance access.
- Establishes intrinsic-safety isolation through the approved CHARM and its matched termination assembly.
The current ordering configuration is SE4307T01, the DeltaV Intrinsically Safe 4-20 mA HART Analog Input CHARM documented by Emerson for DeltaV IS Electronic Marshalling.
SE4307T01 is used in IS transmitter loops that provide a 4-20 mA process variable and HART data. Its system role and configuration limits must remain aligned with the official specification.
Before commissioning SE4307T01, verify the installed assembly, project wiring, power, software and environmental conditions that apply to this exact part number.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson SE4307T01:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- IS transmitter loops that provide a 4-20 mA process variable and HART data.
- Electronic-marshalling designs that configure each analog channel independently.
- Maintenance of one intrinsically safe input without replacing a multi-channel analog card.
- Use the CHARM within the approved IS electronic-marshalling enclosure.
- Observe the product-label temperature and hazardous-area markings.
- Maintain separation and installation conditions required by the IS baseplate.
- Monitor the analog process variable and channel diagnostics in DeltaV.
- Review supported HART status data when transmitter health is questioned.
- Distinguish loop-current faults from communication faults during troubleshooting.
- Verify intrinsic-safety entity parameters before connecting the transmitter loop.
- Use only the terminal assembly approved for SE4307T01 service.
- Follow the site's hazardous-area isolation procedure before replacement.