Features:
- Terminates the redundant CHARM I/O bus at the end of a baseplate row.
- Fits the bottom position of the supported DeltaV Electronic Marshalling assembly.
- Provides a female bottom connector for the final baseplate interface.
SE4604T04 combines hardware role of I/O bus termination, mounting position of Bottom of baseplate row, and connector orientation of Bottom, female in the DeltaV Electronic Marshalling platform.
It terminates the redundant CHARM I/O buses at the bottom of a supported baseplate row. This role connects the CHARMs Baseplate Terminator Bottom Female to the surrounding DeltaV Electronic Marshalling architecture.
Before commissioning, place the terminator after the last supported baseplate; retain the supplied separation hardware; and de-energize the assembly before removal or insertion.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson SE4604T04:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Completes a DeltaV CHARM I/O baseplate row by providing the required bottom-end termination.
- Supports Electronic Marshalling assemblies that distribute redundant communications and power along the row.
- Provides the bottom termination hardware for CHARM rows installed in cabinets or field junction boxes.
- Works within the DeltaV CHARM I/O architecture and its supported baseplate arrangement.
- Connects to the redundant CHARM baseplate buses used throughout the completed I/O row.
- Position the terminator immediately after the last supported baseplate in the assembled row.
- Installs after the final supported baseplate to close the lower end of the CHARM I/O row.
- Includes the identifier required to complete and correctly identify the assembled baseplate section.
- Uses the supplied separation wall to preserve the specified spacing and arrangement of the completed row.
- Match the full nameplate code before replacing the existing bottom terminator in an installed row.
- Retain the supplied separation hardware whenever the terminator is removed and reinstalled.
- De-energize the baseplate assembly before inserting or removing the terminator hardware.