Features:
- 24 VDC Power CHARM is the documented charm type for KL3007X1-BA1 as this 24 VDC Power CHARM.
- KL3007X1-BA1 has a documented field power of 24 VDC at 1.01 A for this 24 VDC Power CHARM.
- KL3007X1-BA1 operates within the documented -40 to 70 degrees C temperature range for this 24 VDC Power CHARM.
The current ordering configuration is KL3007X1-BA1, the DeltaV 24 VDC Power CHARM identified for the DeltaV Electronic Marshalling.
KL3007X1-BA1 performs the documented 24 VDC Power CHARM function within the DeltaV Electronic Marshalling architecture. Its operation follows the capabilities and limits assigned to this exact ordering configuration.
Before commissioning, confirm load current, use the correct baseplate and terminal hardware, and remove power before insertion or removal.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson KL3007X1-BA1:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Deliver 24 VDC field power through a compatible CHARM terminal block in an Electronic Marshalling installation.
- Supply documented field circuits requiring up to 1.01 A from the 24 VDC Power CHARM.
- Populate a 5A-keyed CHARM position where the DeltaV cabinet design specifies this power function.
- Apply the published capacity and execution limits when sizing KL3007X1-BA1 for this 24 VDC Power CHARM.
- Confirm controller loading and channel demand remain within the documented KL3007X1-BA1 ratings.
- Validate the installed KL3007X1-BA1 performance under the intended DeltaV operating conditions.
- 5A is the documented hardware key for KL3007X1-BA1 as this 24 VDC Power CHARM.
- Install KL3007X1-BA1 only with the carrier, terminal, and field-wiring components documented for this 24 VDC Power CHARM.
- Verify keying, circuit ratings, and power isolation before connecting or removing KL3007X1-BA1.
- KL3007X1-BA1 has a documented storage-temperature range of -40 to 85 degrees C for this 24 VDC Power CHARM.
- KL3007X1-BA1 supports 5 to 95%, non-condensing relative humidity for the documented 24 VDC Power CHARM.
- KL3007X1-BA1 has a documented protection rating of IP20 for this 24 VDC Power CHARM.