Features:
- 2mm linear range with 8 V/mm scale factor and ±0.025mm DSL.
- Armored construction with -35°C to +180°C operation for harsh environments.
- ATEX, IEC-Ex, CSA with intrinsic safety (ia) and non-sparking (nA) approvals.
The PR6423/01C-010 CON021 features an armored cable for enhanced mechanical protection against physical damage, making it suitable for harsh industrial environments. The sensor operates from -35°C to +180°C for the sensor including 1m cable, and -35°C to +150°C for the cable and connector. The PR6423/01C-010 CON021 features IP66 protection per IEC 60529, providing resistance to dust and water ingress. The PR6423/01C-010 CON021 is constructed with a PEEK sensor tip, stainless steel case, PTFE cable, and nickel-plated brass connector.
The PR6423/01C-010 CON021 is an 8mm eddy current sensor providing high-precision measurement of shaft dynamic displacement, position, eccentricity, and speed. With a linear measurement range of 2mm (80 mils) and an initial air gap of 0.5mm (20 mils), the PR6423/01C-010 CON021 delivers accurate data for critical turbomachinery monitoring. The Incremental Scale Factor of 8 V/mm (203.2 mV/mil) ±5% over 0°C to 45°C ensures reliable signal output. The PR6423/01C-010 CON021 achieves DSL of ±0.025mm (±1 mil), making it suitable for applications requiring high measurement accuracy.
The PR6423/01C-010 CON021 carries multiple hazardous area certifications including ATEX, IEC-Ex, and CSA, supporting both intrinsic safety (ia) and non-sparking (nA) approvals. The PR6423/01C-010 CON021 has temperature classifications T6 (Ta ≤ 64°C), T4 (Ta ≤ 114°C), and T3 (Ta ≤ 160°C) depending on the converter and application. The PR6423/01C-010 CON021 complies with CE directives including 2014/30/EU (EMC), 2014/34/EU (ATEX), and 2011/65/EU (RoHS). The PR6423/01C-010 CON021 features an M10x1 case thread and is available with Lemo connector or open cable ends.
The PR6423/01C-010 CON021 EPRO 8mm Eddy Current Sensor may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
EPRO PR6423/01C-010 CON021 8mm Eddy Current Sensor Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
EPRO PR6423/01C-010 CON021 8mm Eddy Current Sensor Specs
General
- Manufacturer EPRO
- Model PR6423/01C-010 CON021
- Condition New Original ready stock
- Product Family
PR6423/10R-010,PR6423/00R-101 CON031,PR6423/003-030 CON021
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Power Generation Plants: Deployed on nuclear, fossil fuel, and hydroelectric facilities to safeguard multi-stage steam turbines, massive hydro runners, and primary gas turbines
- Petrochemical & Refining: Used within dangerous processing areas to track the operation of critical process gas compressors, high-pressure hydrocarbon pumps, and large industrial fans.
- Heavy Manufacturing & Maritime: Integrated into marine propulsion systems, turbochargers, large-scale gearboxes, and industrial air separation units.
- Measurement Range:Standard linear measurement range of 2.0 mm (80 mils).
- Dynamic Response:High frequency range spanning 0 to 20,000 Hz (-3 dB) with a rise time under 15 µs.
- Sensitivity Profile:Delivers an Incremental Scale Factor (ISF) of 8 V/mm (203.2 mV/mil).
- Accuracy & Linearity:Deviation from best fit straight line (DSL) stays within ±1% of full scale.
- Environmental Protection:The PR6423 probe head withstands -35°C to +180°C, while the CON021 converter supports a -30°C to +100°C cabinet environment.
- Dynamic Shaft Vibration Monitoring
- Axial Thrust Displacement Protection
- Phase Reference & Speed Detection (Keyphasor)