- Enter the real target count before interpreting speed
- Match sensor waveform and trigger settings over the full speed range
- Configure redundancy only with mechanically equivalent inputs
EPRO MMS6312 is a two-channel speed monitor for rotational speed, key-phase, direction and redundant-speed duties in MMS 6000 systems.
It supports documented eddy-current and Hall or magnetic sensor arrangements and provides configurable protection, proportional and buffered outputs for rotating machinery.
Before replacement, record sensor and target details, pulses per revolution, speed range, trigger thresholds, direction logic, redundancy mode, alarms, relays, outputs, bypasses and module configuration.
Availability, condition, price, and shipping time for MMS6312 are confirmed during quotation.
Emerson MMS6312 Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Set pulses per revolution from the actual target
- Confirm engineering units and full speed range
- Compare indicated speed with an independent reference
- Verify air gap and waveform at minimum and maximum speed
- Set threshold and hysteresis to avoid edge doubling
- Inspect shielding and sensor supply before replacing the module
- Preserve direction and redundant-speed logic
- Restore alarms, relays and analog outputs
- Test dropout and recovery under controlled conditions
- Turbine and compressor rotational-speed monitoring
- Redundant speed measurement for machinery protection
- Key-phase and direction monitoring in MMS 6000 systems