- Exact EPRBEG1 board marking with FR00/0 code
- Encoder/process-interface function
- Corresponding 531X134EPRBEG1 board-family identity
F31X134EPRBEG1 FR00/0 is an General Electric Encoder Process Interface Board designed for GE DC-300 and compatible general-purpose drive systems.
It interfaces encoder and process-feedback signals in the drive and adds the exact FR00/0 board marking to the EPRBEG1 identity.
Before replacement, verify the full label, receiving position, connector keying, configuration hardware, paired assemblies, and every affected control or feedback path.
Availability, condition, price, and shipping time for F31X134EPRBEG1 FR00/0 are confirmed during quotation.
General Electric F31X134EPRBEG1 FR00/0 Encoder Process Interface Board Manuals, Product Family, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Seven potentiometers provide the board's individual adjustment points
- Four resistor-network arrays form part of the encoder and tachometer signal-conditioning circuitry
- The PI-tach scale can be adjusted at 50 percent motor speed through the three-position terminal arrangement
- FR00/0 completes the requested F31X134EPRBEG1 hardware marking
- The board also carries the alternate 531X134EPRBEG1 number
- Three vertical male cable connectors, one pin header, and the three-screw terminal strip form its external interfaces
- More than twenty jumpers establish the board-level hardware configuration
- Each jumper position must be mapped together with the seven potentiometer settings
- A configuration copied from another EPRB suffix may not reproduce the FR00/0 feedback response
- Encoder feedback in GE DC-300 adjustable-speed drives
- Process-feedback interfacing in related GE general-purpose drives
- Closed-loop motor-speed control requiring the FR00/0 EPRB execution