- D3 +5 V EPRB interface-board function
- Seven-switch tachometer-range selector and seven potentiometers
- Mounting relationship to the F31X139APMAL micro-application board
F31X134EPRBHG1 is a General Electric D3 +5 V Encoder Process Interface Board designed for GE DC-300 and compatible general-purpose drive systems.
It provides encoder/process interfacing and D3 +5 V circuitry, with adjustable tachometer-range hardware and connectors for the companion micro-application board.
Before replacement, verify the full label, receiving position, connector keying, configuration hardware, paired assemblies, and every affected control or feedback path.
Availability, condition, price, and shipping time for F31X134EPRBHG1 are confirmed during quotation.
General Electric F31X134EPRBHG1 D3 +5 V Encoder Process Interface Board Manuals, Product Family, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- D3 +5 V is the documented interface execution of F31X134EPRBHG1
- The board is used in the DC-300 and other compatible GE general-purpose drives
- Its encoder and tachometer signal paths operate through the configured EPRB hardware
- Seven individually numbered toggles form the Tach Range selector
- Seven potentiometers provide separate adjustment points across the board
- More than twenty jumpers and four resistor-network arrays complete the range and signal configuration
- Four corner drill holes accept the screws that attach F31X134EPRBHG1 to F31X139APMAL
- Three vertical male pin connectors and one male header provide board and cable interfaces
- The paired boards must sit squarely so all four mounting points and connector pins remain aligned
- Encoder and tachometer feedback in GE DC-300 drives
- Process-interface service in related GE general-purpose drives
- Feedback conditioning paired with an F31X139APMAL micro-application board