Features:
- Combines a 12-inch 800 × 600 display with two-point projected-capacitive touch.
- Runs QuickPanel+ View and Control functions on an ARM-based embedded platform.
- Provides Ethernet, serial, USB, audio, and SD/SDHC connections in one operator panel.
IC755CSS12CDA presents process graphics and operator controls on a sealed industrial touch surface while running the configured machine project locally.
Its single Ethernet port and paired serial channels let IC755CSS12CDA bridge modern networked devices and installed serial equipment without duplicating operator hardware.
Panel cutout, supply capacity, project backup, connector layout, and the one-port CDA network arrangement should all be checked before an IC755CSS12CDA replacement.
The General Electric IC755CSS12CDA QuickPanel+ 12-Inch Operator Interface may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
General Electric IC755CSS12CDA QuickPanel+ Operator Interface Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Operator Interaction
- Panel Size: The 12-inch TFT gives operators a large fixed surface for machine visualization.
- Resolution: An 800 × 600 SVGA pixel matrix defines the available project workspace.
- Touch Method: Projected-capacitive sensing recognizes two simultaneous touch points.
- Local Feedback: A tri-color status indicator and onboard buzzer supplement the graphical display.
External Interfaces
- Ethernet: The CDA hardware provides one 10/100Base-T RJ45 network connection.
- Serial Channels: One RS-232 and one RS-485 port share the designated 10-pin connector.
- USB: Two Type-A host connectors and one Mini Type-B device connector support peripherals and service access.
- Removable Media: An SD/SDHC slot provides portable storage for supported project and data functions.
Embedded Computing Platform
- Processor: A 1 GHz ARM Cortex-A8 device runs visualization and control tasks.
- Working Memory: One gigabyte of DDR3 SDRAM supports the active operating environment and project.
- Program Storage: The panel includes 512 MB of SLC NAND flash for embedded software and files.
- Retained Memory: Battery-backed SRAM preserves supported data that must survive a power cycle.
Panel and Power Planning
- Enclosure Size: The 314 × 248 × 65 mm body fits a 302 × 228 mm panel cutout.
- Supply: A 12/24 VDC source within the stated tolerance must support as much as 30 W.
- Cooling: Natural convection requires clearance around the enclosure and an ambient range of 0 to 55 °C.
- Front Seal: Correct gasket compression and mounting hardware preserve the rated front-panel protection.