Features:
- Combines sixteen 24 VDC inputs with twelve output points in one controller.
- Uses eleven relay outputs for flexible AC or DC load switching.
- Adds one 24 VDC transistor output for a faster solid-state command.
General Electric IC200UDR010 suits compact machines that need isolated relay contacts and a dedicated electronic output without splitting control across two base units.
The RS232 and RS485 interfaces can separate programming access from a compatible serial device connection, simplifying commissioning where both links are needed.
Counter, pulse and PWM resources are available for modest-speed sensing or command tasks, while expansion positions accommodate later I/O growth.
The General Electric IC200UDR010 VersaMax Micro 28 PLC may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
General Electric IC200UDR010 VersaMax Micro 28 PLC Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Mixed Output Architecture
- Relay Bank: Eleven electromechanical contacts can switch compatible AC or DC field loads.
- Fast Point: One 24 VDC transistor output avoids relay operating delay for a selected command.
- Input Side: Sixteen 24 VDC inputs collect discrete machine-state signals.
- Circuit Planning: The solid-state point and relay contacts require the correct load references and protection.
Controller Resources
- Program Space: A 9K-word logic area holds the control sequence and interlocks.
- Data Area: A separate 2K-word data space supports application values and status records.
- Retention: Battery and supercapacitor backup protect retained information during power loss.
- Timekeeping: The integrated real-time clock supports scheduled or time-stamped logic.
Communications and High-Speed Functions
- Dual Ports: RS232 and RS485 interfaces support programming and compatible serial equipment.
- Counting: Four hardware counters can monitor supported pulse inputs at rates up to 10 kHz.
- Pulse Control: Four output channels can be assigned to pulse or PWM operation up to 5 kHz.
- Configuration: Port parameters and high-speed channel assignments are set in PAC Machine Edition.
Suitable Control Tasks
- Packaging Cells: Mixed contacts and a fast output can coordinate sensors, solenoids and timing signals.
- Small Conveyors: Discrete interlocks fit start, stop, permissive and product-detection sequences.
- Utility Skids: Relay isolation supports varied field voltages in compact pump or fan panels.
- Test Fixtures: Serial connectivity and onboard timing assist repeatable automated checks.