- Four single-ended voltage outputs
- 12-bit −10 to +10 VDC conversion
- Selectable hold-last-state or zero-output behavior
IC200ALG322 supplies four analog voltage commands for compatible actuators and control devices in the VersaMax I/O platform.
Fast updates, field-power diagnostics, and a selectable safe-state jumper support controlled machine integration.
Accurate operation depends on correct power, commons, shields, load impedance, engineering scaling, and carrier or expansion-rack compatibility.
Availability, condition, price, and shipping time for IC200ALG322 are confirmed during quotation.
General Electric IC200ALG322 VersaMax 12-Bit Analog Voltage Output Module, Four Channels Manuals, Product Family, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Four single-ended channels share one output group.
- The documented range is −10.24 to +10.24 VDC.
- Resolution is 5 mV per count across 12-bit conversion.
- Use 9.6–15 VDC for nominal 12 V operation or +18–30 VDC for nominal 24 V operation.
- Allow up to 210 mA including load in the 12 V range or 160 mA including load in the 18–30 VDC range.
- Each output load must be at least 5000 ohms and no more than 1.0 µF.
- FLD PWR indicates field-side power state.
- OK indicates module operating status.
- Loss of user-side power is reported diagnostically.
- Analog speed or reference commands
- Valve, actuator, and positioner voltage control
- Machine and process setpoint generation