Features:
- Provides 16 analog input channels for current and voltage process signals.
- Converts field measurements through the module analog-acquisition circuitry.
- Integrates measured values into the Nexus OnCore controller architecture.
MAI50 combines input type of mA/V analog input, channels of 16, and i/o function of Analog acquisition in the Nexus OnCore platform.
It acquires sixteen milliamp or voltage analog input channels for the OnCore control system. This role connects the Nexus OnCore 16-Channel mA/V Analog Input Module to the surrounding Nexus OnCore architecture.
Before commissioning, confirm the selected current or voltage input configuration; match the complete regional part-number suffix; and use the certified enclosure and grounding provisions.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for General Electric MAI50:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Acquires multiple industrial current or voltage signals within a Nexus OnCore control system.
- Connects compatible analog transmitters to the OnCore data-acquisition architecture.
- Supports approved panel-mounted process-control installations located in certified hazardous areas.
- Operates from the nominal 24 VDC supply provided by the Nexus OnCore system.
- Consumes up to 11.0 W under the specified analog-input module configuration.
- Combines an onboard processor subsystem with dedicated analog-signal acquisition circuitry.
- Specifies a certified ambient operating range from -20 to +50 degrees C on the analog-input nameplate.
- Carries Class I Division 2 and Zone 2 markings for the approved hazardous-location installation.
- Requires panel mounting in a minimum IP54 enclosure when installed under the stated ATEX conditions.
- Confirm whether the installed channels require the current-input or voltage-input configuration.
- Match the complete regional part-number suffix when selecting or ordering the replacement module.
- Maintain the certified enclosure and grounding provisions required by the installed assembly.