Features:
- Direct SLC integration: Delivers weight data through the controller backplane.
- Vibration rejection: WAVERSAVER stabilizes readings around operating machinery.
- Electronic calibration: C2 and THE BUTTON reduce dependence on test weights.
HI 1746-WS turns an SLC 500 rack position into a complete industrial weighing interface.
The module reads Hardy load points or compatible load cells, compares weight against setpoints and transfers results directly to the SLC input image.
Diagnostics and electronic calibration reduce commissioning time while keeping scale control inside the existing PLC program.
For HI 1746-WS sourcing, Apter Power can help confirm SLC processor, module series, firmware, slot mapping, load-cell interface and calibration records. HARDY HI 1746-WS is listed as SLC 500 Weigh Scale Module.
HARDY HI 1746-WS SLC 500 Weigh Scale Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Measurements: Reports net, gross and rate-of-change data.
- Conversion: Uses a 20-bit A/D converter with 20 updates per second.
- Setpoints: Compares weight to setpoint and pre-act values.
- Fast control: Two TTL drive signals support direct output action.
- C2 calibration: Supports electronic calibration with compatible load points.
- Test weights: Conventional test-weight calibration remains available.
- WAVERSAVER: Rejects low-frequency vibration from nearby machinery.
- INTEGRATED TECHNICIAN: Supports weighing-system monitoring and troubleshooting.
- Processor family: Works with SLC 5/02 through SLC 5/05 processors.
- Rack use: Fits one slot in local or remote I/O.
- Data access: Uses 32 scanned I/O words and 128 M-file words.
- Series control: Series A needs firmware 2.0 or later for direct M-file mapping.
- Batching systems: Measures ingredients and triggers pre-act control near target weight.
- Filling machines: Sends fast setpoint results to the PLC sequence.
- Check weighing: Compares product weight with acceptance limits.
- Material handling: Integrates hopper, vessel and conveyor scales with SLC logic.