Features:
- Non-Redundant 24 VDC Chassis Series-A Power Supply
- Provides Four Regulated Backplane Voltage Rails
- Mounts in the Dedicated Left-Side Power-Supply Position
The
Honeywell TC-FPDXX2 accepts a 19.2–32 VDC source and supplies regulated 24 VDC, 5.1 VDC, 3.3 VDC, and 1.2 VDC rails to the Chassis Series-A backplane. The specified maximum combined output is 70 W at 60°C.
This standard configuration is non-redundant and does not consume a control-module slot. System planning should confirm the DC source, conductor size, total backplane load, and required chassis architecture.
For ordering, provide the complete TC-FPDXX2 model, chassis type, DC source, and required quantity so Apter Power can confirm availability and configuration.
Honeywell TC-FPDXX2 Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
HONEYWELL TC-FPDXX2 Power Supply Module Specs
General
- Manufacturer HONEYWELL
- Model TC-FPDXX2
- Condition New Original ready stock
- Product Family Honeywell Experion PKS ( C200, C300 )
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Designed for a standard non-redundant Chassis Series-A configuration.
- Accepts a 19.2–32 VDC input source.
- Mounts on the left side of the chassis without occupying a control-module slot.
- Input power: 100 W.
- Maximum combined backplane output: 70 W at 60°C.
- Backplane rails: 24 VDC, 5.1 VDC, 3.3 VDC, and 1.2 VDC.
- Confirm the complete TC-FPDXX2 identification.
- Verify the chassis type, DC source, and calculated backplane load.
- Do not assume compatibility with redundant power-supply configurations.