Features:
- Transfers 24 VDC from the MB-0001 main power rail to Safety Manager distribution hardware.
- Uses Honeywell CC600 cable with two 6 mm2 conductors and a documented length of 145 cm.
- Combines a squeeze-to-release main-rail plug with a keyed two-pole load-side connector.
The current ordering configuration is Honeywell
FS-PDC-MB24-1P, the 1P length in the PDC-MB24-y main-rail power-cable family.
It carries 24 VDC from an MB-0001 main power rail to a PDB-0824P distribution board or a compatible FTA equipped with the documented keyed connector.
Before installation, confirm the exact 1P length, the MB-0001 rail connection, load-side keying and +24 VDC/0 VDC polarity shown in the cabinet design.
Availability is subject to Apter Power inventory and confirmation of the main-rail distribution layout.
Honeywell FS-PDC-MB24-1P manuals and reference links:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Honeywell FS-PDC-MB24-1P General Specifications
General
- ManufacturerHoneywell
- ModelFS-PDC-MB24-1P
- ConditionNew original ready stock
- Product FamilySafety Manager Power Distribution
- The cable is designed to connect directly to the Honeywell MB-0001 main power rail used in Safety Manager cabinet layouts.
- The load side can connect to a PDB-0824P power-distribution board through the documented keyed two-pole interface.
- It can also feed FTAs equipped with a Weidmuller SV 7.62HP/02/180F connector keyed for 24 VDC service.
- The main-rail end uses a two-pole D-TAB-200-STR squeeze-to-release connector for controlled removal and reconnection.
- The FTA or board end uses a keyed Weidmuller BVZ 7.62HP/02F SN connector that locks into the receiving hardware.
- Pin 1 carries +24 VDC and pin 2 carries 0 VDC, so the documented keying and polarity must be retained.
- The official cable type is Honeywell CC600 with two 6 mm2 conductors for the 24 VDC power-distribution path.
- FS-PDC-MB24-1P has a documented finished length of 145 cm, equivalent to 57.1 in.
- The FTA or board connector uses Weidmuller BV/SV 7.62HP KO keying to identify the 24 VDC connection.