Product overview:
- One Metering Calculation Library license per site
- Use by all ControlEdge Builder instances at that site
- Gas and liquid AGA, API and ISO calculation blocks
Honeywell SP-MCALC1 is a site license for the ControlEdge Metering Calculation Library. One site entitlement permits the library to be used by all ControlEdge Builder instances located at that licensed site.
The library supplies function blocks for gas and liquid measurement calculations, including documented AGA, API and ISO methods. It supports engineering of electronic flow-metering applications in ControlEdge RTU without treating each Builder workstation as a separate library license.
Before applying SP-MCALC1, define the licensed site boundary, required calculation standards, units, fluid data and meter configuration. Validate the selected blocks against the custody-transfer design, controller release and project test procedure before commissioning.
Verified resources for SP-MCALC1:
License Data:
- License scope: site entitlement
- Authorized installations: all Builder clients at the site
- Function-block scope: gas and liquid metering
Use the documented SP-MCALC1 entitlement or release data when planning the engineering environment.
Compatibility:
- Match the library to the Builder release
- Confirm the required AGA, API and ISO methods
- Validate units and fluid-property data
Compatibility for SP-MCALC1 depends on the exact software release, controller firmware and validated project revision.
Deployment:
- Define the licensed site boundary
- Select calculation blocks in the project
- Validate results against the metering design
Deploy SP-MCALC1 under controlled engineering access and retain the installation and entitlement records.
Installation Check:
- Verify library entitlement
- Check standards and engineering units
- Record calculation validation results
Complete release, project and communication checks before SP-MCALC1 is used on a production system.