Features:
- Transfers 24/48/110V DC from mains rails to IO chassis modules.
- EP1a, EP2a, EP3a, IP1a with 33-57cm lengths for flexible installation.
- Squeeze To Release bus bar connector with FM5W5 S low-profile chassis connector.
The FS-PDC-IOSET is a power distribution cable set specifically designed for Honeywell FSC (Fail-Safe Control) system IO chassis. It transfers 24V DC, 48V DC, or 110V DC from the mains power rails (FS-MB-0001) to the IO chassis, powering both internal and external slots. The FS-PDC-IOSET ensures reliable power delivery to critical safety modules. The FS-PDC-IOSET's external power connectors (EP1, EP2, EP3) power slots 1-18, while the internal power connector (IP1) powers all internal slots, providing comprehensive power distribution.
The FS-PDC-IOSET consists of four cables with specific lengths for different power connectors: FS-PDC-IOEP1a (33cm) for EP1, FS-PDC-IOEP2a (41cm) for EP2, FS-PDC-IOEP3a (49cm) for EP3, and FS-PDC-IOIP1a (57cm) for IP1. The FS-PDC-IOSET uses CC 600 World 4 × 2.5 mm² cable type, ensuring low voltage drop. To avoid assembly mistakes, the FS-PDC-IOSET recommends color-coded labels or sleeves for voltages other than 24V DC, making identification easier during installation and maintenance.
The FS-PDC-IOSET features a 2-pole Squeeze To Release type connector (D-TAB-200-STR) on the bus bar side, ensuring secure and reliable connection to the mains power rail. The FS-PDC-IOSET uses an FM5W5 S (female) connector on the IO chassis side with a low profile 90° housing, facilitating easy routing and connection. The FS-PDC-IOSET carries UL and CSA approvals with FM pending, ensuring compliance with international safety standards. The FS-PDC-IOSET's robust connector system ensures reliable power distribution in demanding industrial environments.
The FS-PDC-IOSET HONEYWELL Power Distribution Cable may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
HONEYWELL FS-PDC-IOSET Power Distribution Cable Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
HONEYWELL FS-PDC-IOSET Power Distribution Cable Specs
General
- Manufacturer HONEYWELL
- Model FS-PDC-IOSET
- Condition New Original ready stock
- Product Family
FS-TSFIRE-1624,FS-TPSU-2430,FS-USI-0001,FS-PDC-CPSET
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Emergency Shutdown Systems (ESD): Critical power routing to safe-state output modules for immediate plant isolation.
- Fire and Gas Systems (F&G): Supplying power to widely distributed detection networks and flame/smoke detectors.
- Burner Management Systems (BMS): Powering dual-fault tolerant fuel-shutoff valves and boiler ignition interlocks.
- High Integrity Pressure Protection Systems (HIPPS): Providing reliable power to fast-acting overpressure isolation valves in upstream extraction.
- Core Industrial Verticals: Offshore Oil & Gas platforms, petrochemical plants, refineries, LNG terminals, and large-scale chemical processing.
- Dual-Bus Physical Redundancy: A single set includes two distinct cables to independently link the Left and Right Safety Manager power buses (e.g., via the MB-0001 Power Bus Chassis) to the redundant IO Chassis (IOCHAS-0001).
- Short-Circuit and Overcurrent Mitigation: Integrates embedded inline fuses or works directly with upstream Power Distribution Boards (PDBs) to isolate single-channel wire faults without tripping the whole IO rack.
- Mechanical Coding (Poka-Yoke): Uses heavy-duty, low-profile FM5W5 S connectors combined with distinct color-coded sleeves. This eliminates the risk of cross-connecting different system voltages (e.g., 24Vdc, 48Vdc, 110Vdc) which could bypass SIL-certified isolation.
- Flame-Retardant and Low-Smoke Outer Jacket: Rated for demanding industrial enclosures to withstand internal localized electrical heat spikes without spreading fire.
- Hot-Swapping Compliance: Due to the system's dual-redundant architecture, one cable of the set can safely be replaced while the system is live and online, provided the partner power branch is confirmed healthy and active.
- Bending Radius Constraints: Strict adherence to minimum dynamic bending radiuses inside dense marshaling cabinets is required to prevent microscopic internal core breakage over years of thermal expansion.
- System Migration / Legacy Upgrades: When upgrading older FSC (Fault Tolerant Safety Controller) legacy systems to newer Safety Manager SC (Series C platform) architectures, the FS-PDC-IOSET is critical for bridging newly adapted 19-inch universal IO racks back to the main system power chassis.