Features:
- 10.5 m length encoded by the 10M5 ordering suffix
- External 40-channel input connection between a remote FTA and Trusted I/O module
- Two chassis-side type C connectors and one FTA-side type R connector
For
TC-203-02-10M5, the TC-203 prefix selects the external companion-slot input topology while 02 identifies the documented cable-material option and 10M5 defines the finished length.
Remote field signals reach the Trusted input module through a screened multi-core assembly. The defined connector hoods, screen drain, and safety-earth braids support controlled termination at both ends of the run.
Cable routes for this external arrangement must be protected from mechanical damage and should not place tensile load on the connector hoods. Confirm the target module, FTA, cabinet path, and earth method before installation.
Quotation, official documentation, and configuration support for the ICS Triplex TC-203-02-10M5 Trusted External 40-Channel Input-to-FTA Companion Slot Cable are available from Apter Power.
ICS Triplex TC-203-02-10M5 Trusted External 40-Channel Input-to-FTA Companion Slot Cable Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ICS Triplex TC-203-02-10M5 Trusted External 40-Channel Input-to-FTA Companion Slot Cable Specs
General
- Manufacturer ICS Triplex
- Model TC-203-02-10M5
- Condition New Original ready stock
- Product Family Trusted I/O Companion Slot Cables
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Connector arrangement
- Construction: Connector hoods are joined by a screened multi-core cable with protected breakout sections.
- Grounding: Safety-earth braids are provided at chassis and FTA ends, with a remote screen-drain conductor.
- Protection: Nylon Rilgain, PVC tape, and heat-shrink protect the documented breakout arrangement.
- Routing: The cable is external to the cabinet arrangement but is not armoured and requires protected routing.
Screening and protection
- Cable Length: TC-203-02-10M5 is documented with cable length of 10.5 m.
- Cable Arrangement: TC-203-02-10M5 is documented with cable arrangement of External companion slot.
- Signal Direction: TC-203-02-10M5 is documented with signal direction of Input from remote FTA to module.
- Channel Capacity: TC-203-02-10M5 is documented with channel capacity of 40 input channels.
Routing checks
- Catalog check: Retain the complete TC-203-02-10M5 order code when matching the installed trusted external 40-channel input-to-fta companion slot cable.
- System pairing: Confirm the approved Trusted I/O Companion Slot Cables chassis, module, cable, or backplane context before replacement.
- Physical review: Check the documented 10.5 m cable length product dimensions together with connectors, routing, and enclosure clearance.
- Official procedure: Use the applicable manufacturer manual for installation, energization, diagnostics, and maintenance.