Features:
- Regulates valve position through an onboard PID control loop.
- Uses redundant input and output channels for reliable actuator control.
- Supports configured actuator feedback within the Nexus OnCore architecture.
MVP50 combines control function of Valve position control, i/o architecture of Redundant input and output channels, and servo function of On-board PID control loop in the Nexus OnCore platform.
It performs valve-position control with redundant I/O channels and an on-board PID servo loop. This role connects the Nexus OnCore Valve Position Control Module to the surrounding Nexus OnCore architecture.
Before commissioning, verify the standard versus high-speed MVP50 variant; match actuator feedback and project configuration; and maintain certified installation and grounding conditions.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for General Electric MVP50:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Controls industrial valve position through the integrated PID servo loop on the module.
- Uses redundant I/O channels within the Nexus OnCore valve-control architecture.
- Supports panel-mounted turbine and process-control applications that require closed-loop actuator control.
- Operates from the regulated 24 VDC supply provided by the Nexus OnCore system.
- Consumes up to 11.0 W under the specified valve-control module configuration.
- Provides the standard valve-position control variant intended for supported actuator installations.
- Carries a certified -20 to +50 degrees C ambient range on the valve-control module nameplate.
- Uses Class I Division 2 and Zone 2 markings to identify the approved hazardous-location service.
- Requires panel mounting inside a suitable enclosure that preserves the applicable certification conditions.
- Verify whether the installed application requires the standard or high-speed controller variant.
- Match actuator-feedback characteristics and project settings before commissioning the replacement module.
- Maintain the certified installation and grounding conditions throughout mounting and service work.