- Connects each FCP280 side to a fiber control-network path
- Requires the documented FCP280 baseplate and cable assembly
- Verify switch optics and connector orientation before commissioning
RH924WA is selected when an FCP280 pair connects to the control network over multimode fiber rather than copper Ethernet.
Each adapter belongs to one side of the redundant FCP280 arrangement, so both network paths and switch ports must be identified before replacement.
Official documentation verifies the fiber interface and cable limits but does not publish standalone RH924WA dimensions or net weight.
Availability, condition, price, and shipping time for RH924WA are confirmed during quotation.
Foxboro RH924WA Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Use the documented multimode fiber assembly
- Keep transmit and receive orientation unchanged
- Clean and inspect every optical connector before mating
- Install the adapter only in the supported baseplate position
- Associate each adapter with the correct controller side
- Confirm baseplate seating and power before network diagnosis
- Map both adapters to separate approved switch paths
- Check link status and controller diagnostics together
- Perform failover testing only under the site procedure
- Fiber connection for redundant FCP280 controllers
- Long-distance Foxboro control-network links
- Replacement of installed RH924WA optical adapters