Features:
- Calibrated input and output ranges can be selected with DIP switches.
- The 12.5 mm modular housing supports high-density DIN-rail installation.
- Three-port galvanic isolation separates signal circuits from the power supply.
The current configuration is the F1 modular version with screw terminals for installation on a 35 mm top-hat rail.
The isolator is intended to provide electrically separated transmission of standard measurement signals between field devices and control or display systems.
Before selecting a range, verify the required signal direction, supply option, wiring arrangement and available clearance inside the control cabinet.
The B 13000 F1 is documented as a VariTrans standard-signal isolation amplifier for industrial measurement circuits.
Verified resources for Knick B 13000 F1:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Galvanic separation between measurement sensors and PCS or DCS controllers.
- Conversion of voltage signals into current signals for long-distance transmission.
- Signal multiplication for evaluation by multiple control or display devices.
- Input and output ranges are selected independently with calibrated DIP-switch settings.
- Supported selections include 0 to 20 mA, 4 to 20 mA and 0 to 10 V.
- Switchable ranges are calibrated at the factory and do not require manual readjustment.
- The signal path provides linear transmission with a cut-off frequency above 1 kHz.
- Low power consumption helps reduce self-heating in tightly packed control cabinets.
- The compact 12.5 mm housing allows up to 80 active isolators per metre of rail.
- The isolation amplifier carries CE marking for the documented EMC and low-voltage requirements.
- CUL approval references UL 3101-1 and CSA-C22.2 No. 10101-1.
- GL approval is identified by certificate number 14627-99 HH for Environmental Category D.