Features:
- 300 MHz MPC604 PowerPC processor
- 16MB two-way interleaved, ECC-protected DRAM
- Two IEEE P1386.1 PMC sites with front-panel and P2 I/O support
The Motorola MVME2305 ordering code identifies the 16MB ECC DRAM configuration in the 300 MHz MPC604 group of the MVME2300 Series.
Its single-slot VME platform combines processor, memory, PCI, Ethernet, debug, and VMEbus resources while accepting compatible PMC functions.
Confirm the P1/P2 backplane arrangement, PMC I/O routing, firmware, power budget, and forced-air cooling before installing the board.
The Motorola MVME2305 VME Processor Module may still be available for quotation and support from Apter Power beyond manufacturer End-Of-Life (EOL).
Motorola MVME2305 VME Processor Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME2305 VME Processor Module Specs
General
- ManufacturerMotorola VME
- ModelMVME2305
- ConditionNew Original ready stock
- Product FamilyMVME2300 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Processor and memory resources
- Processor: The board uses a 300 MHz MPC604 PowerPC processor with 32KB instruction and 32KB data cache.
- Protected memory: The MVME2305 configuration provides 16MB of two-way interleaved, ECC-protected DRAM.
- Flash resources: Motorola documents 1MB through two socketed devices plus 4MB of surface-mounted Flash memory.
- Local services: An 8KB NVRAM time-of-day clock device, watchdog timer, and four programmable timers support board operation.
Mezzanine and I/O planning
- Onboard sites: Two IEEE P1386.1 PMC positions provide front-panel and P2 I/O access for compatible mezzanine cards.
- Expansion path: Optional PMCspan modules can extend the system to support as many as six PMCs.
- PCI signaling: The documented PMC interface operates on a 32-/64-bit, 33 MHz PCI local bus with 5 V signaling.
- Power check: Allow for the separate power demand of installed PMCs when reviewing the chassis and cooling budget.
Chassis and environmental checks
- Board format: The base module is a double-high VME board measuring 233 mm high, 160 mm deep, and 19.8 mm wide at the front panel.
- Backplane: Verify the VME slot and the P1 and P2 connections before seating the MVME2305.
- Cooling: The specified 0 to 55 °C entry-air range requires forced-air cooling of the complete assembly.
- System matching: Check firmware, PMC routing, connector assignments, and installed option requirements in the Motorola manual.