Features:
- 64MB ECC-protected DRAM configuration
- ANSI/VITA 1-1994 VME64 master and slave capability
- Front-panel Fast Ethernet and asynchronous debug interfaces
Motorola lists MVME2307 as the 64MB configuration paired with the 300 MHz MPC604 processor in the MVME2300 ordering table.
The board brings together PCI, ISA, VMEbus, memory, and local supervisory resources for single-slot embedded computing applications.
Confirm the selected PMC I/O route, backplane signals, firmware environment, and enclosure airflow because these items affect installation matching.
The Motorola MVME2307 VME Processor Module may still be available for quotation and support from Apter Power beyond manufacturer End-Of-Life (EOL).
Motorola MVME2307 VME Processor Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME2307 VME Processor Module Specs
General
- ManufacturerMotorola VME
- ModelMVME2307
- ConditionNew Original ready stock
- Product FamilyMVME2300 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bus control and transfer functions
- Standard: The MVME2307 platform implements the ANSI/VITA 1-1994 VME64 interface.
- Master transfers: Addressing from A16 through A32 supports data widths from D08 through D64 and block transfers.
- Slave transfers: The board supports A24/A32 slave addressing with D08 through D64 transfer capability.
- Controller role: System-controller operation can be selected by jumper or automatic detection in a compatible VME chassis.
Network and service connections
- Ethernet controller: A DEC 21140 device provides PCI-connected network operation.
- Network connector: Front-panel 10/100Base-T connectivity is presented through an RJ45 interface.
- Debug channel: A PC16550 asynchronous serial interface is accessible from a separate front-panel RJ45 connector.
- PMC I/O: Two mezzanine positions provide supported front-panel and P2 routing options.
Thermal and environmental limits
- Entry air: The documented operating range is 0 to 55 °C with forced-air cooling.
- Storage: The board-level storage temperature range is -40 to 85 °C.
- Humidity: Motorola specifies 10% to 80% relative humidity for the MVME230x platform.
- Airflow review: Adjacent boards and installed PMCs change thermal loading and must be considered in chassis airflow planning.