Features:
- 333 MHz MPC604R architecture
- 64MB ECC DRAM resource
- Scanbe handle and two PMC positions
The MVME2304-0131 configuration increases protected memory to 64MB while retaining the 333 MHz MPC604R processor and Scanbe handle.
This memory level supports broader embedded workloads without changing the board's Ethernet, flash, PMC, debug, or VMEbus resources.
Selection must account for the Scanbe faceplate and 64MB requirement; confirm mezzanine modules, system firmware, connector mapping, and thermal conditions as well.
Contact Apter Power to source the Motorola MVME2304-0131 VME Processor Module and verify its documented system requirements.
Motorola MVME2304-0131 VME Processor Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME2304-0131 VME Processor Module Specs
General
- ManufacturerMotorola VME
- ModelMVME2304-0131
- ConditionNew Original ready stock
- Product FamilyMVME2300 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
64MB Scanbe-handle configuration
- Processor: The configuration matrix lists a 333 MHz MPC604R for MVME2304-0131.
- Main memory: Software and data use 64MB ECC DRAM.
- Firmware: The processor module uses 5MB flash for resident firmware and board-specific software.
- Board role: The 0131 configuration combines the 64MB memory tier with Scanbe-panel system integration.
Communication and mezzanine resources
- Ethernet: The 64MB Scanbe configuration exposes the platform's onboard Ethernet resource to the host application.
- PMC sites: Two mezzanine sites complement the 64MB ECC memory on MVME2304-0131.
- Debug port: MVME2304-0131 retains direct debug access for configuration review and fault isolation.
- VMEbus: VMEbus communication integrates the 64MB 0131 board with peer modules in the target chassis.
0131 compatibility review
- Board format: The 0131 Scanbe assembly must match the enclosure guides, panel hardware, and P1/P2 backplane.
- Front handle: Motorola specifies a Scanbe handle for MVME2304-0131; keep that mechanical option when matching the enclosure.
- Cooling: The 0131 configuration depends on forced-air cooling through the occupied double-high slot.
- Final check: The 0131 match depends on 64MB memory, Scanbe hardware, firmware, and compatible mezzanine modules.