Features:
- MC68030 processing with MC68882 support
- SCSI, serial, parallel, and VMEbus resources
- 147Bug diagnostics and system-controller functions
Motorola MVME147 is an unsuffixed family-level designation and does not by itself establish one memory or Ethernet configuration.
MVME147 documentation defines the common 6U processor, communication, storage, and VMEbus architecture shared by documented variants.
Read the complete board label and verify memory, clock, parity, Ethernet, firmware, transition module, and backplane details before selection.
The Motorola MVME147 MPU VMEmodule may be sourced with official documentation and application-matching support from Apter Power.
Motorola MVME147 MPU VMEmodule Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME147 MPU VMEmodule Specs
General
- ManufacturerMotorola VME
- ModelMVME147
- ConditionNew Original ready stock
- Product FamilyMVME147 Family
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Onboard processing and memory resources
- Processor: MC68030 processing with MC68882 floating-point support.
- Interface: Memory capacity depends on the exact documented model.
- ROM resources: Four 32-pin ROM/PROM/EPROM/EEPROM sockets.
- Backup memory: Battery-backed static RAM and time-of-day clock.
Backplane and peripheral connections
- VMEbus: A32/D32 VMEbus master functions.
- VMEbus 2: A24/D16 operation is also supported.
- Serial communication: Four multiprotocol serial ports through P2.
- SCSI: SCSI DMA and Centronics parallel I/O.
Chassis and commissioning checks
- Backplane: Use both P1 and P2 backplanes as specified.
- Cooling: Provide forced-air cooling within the documented limit.
- ROM resources: Verify system-controller and ROM jumper settings.
- Cabling: Check transition-module cabling before power-up.