Features:
- Left-side cable access distinguishes this I/O block from the rear-entry OS32C wiring block.
- Power, control inputs, safety outputs, feedback, and status signals share the field-wiring interface.
- The detachable sensor block leaves the machine-side wiring organized on the I/O block.
Machine power and commands enter through the field cable before reaching the attached OS32C sensor section.
The OSSD pair and EDM return create separate outgoing and feedback paths for the supervised safety circuit.
Keeping the optical head and wiring block as separate sections allows the sensor portion to be identified independently from the installed cable direction.
The Omron OS32C-CBSP1 Left-Side Cable-Entry Replacement I/O Block may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Omron OS32C-CBSP1 Left-Side Cable-Entry Replacement I/O Block Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Routing machine connections through the side-entry block
- Supply pair: The 24 V DC and 0 V conductors power the assembled scanner through the I/O block.
- Zone conductors: Eight selection inputs choose the configured safety and warning-field set.
- Control conductors: Separate start and standby inputs carry their assigned machine commands.
- Cable direction: The connector exits from the left when the block is viewed from the rear.
Separating the stop command from external-device feedback
- OSSD A and B: The paired PNP outputs deliver the scanner's protective state to the downstream safety path.
- EDM return: Feedback from the forced-guided external devices returns through the dedicated monitoring input.
- Output limit: Each OSSD carries no more than the documented 250 mA load.
- Signal separation: Warning and auxiliary outputs remain non-safety indications and do not replace the OSSD pair.
Assigning field selections and operating commands
- Zone selection: The eight input lines encode which stored field combination is active.
- Start path: The start input follows the configured automatic or interlocked restart behavior.
- Standby path: The standby input places the scanner in its documented standby condition.
- Input reference: Each command is wired against the documented 0 V or 24 V state for that function.
Keeping field wiring separate from the optical sensor section
- I/O section: The block contains the machine-side power, input, feedback, and output connections.
- Sensor interface: The OS32C sensor block joins the I/O block to complete the scanner hardware.
- Entry variant: OS32C-CBSP1 creates the side-entry arrangement, while the separate CBBP variant uses rear entry.
- Service boundary: The sensor block can be identified separately without redefining the installed field-cable direction.