Features:
- EtherNet/IP migration gateway for Remote I/O and DH+
- Mode-specific support for drives, HMIs, scanners, and Flex I/O
- Built-in web configuration and network diagnostics
ProSoft AN-X2-AB-DHRIO supports phased migration by activating the firmware mode required for the legacy Allen-Bradley application.
AN-X2-AB-DHRIO handles 57.6, 115.2, or 230.4 kbaud Remote I/O and DH+ networks with capacities that vary by operating mode.
Before replacing AN-X2-AB-DHRIO with AN-X4-AB-DHRIO, record the active firmware, rack addressing, uploaded files, baud rate, Ethernet settings, connector placement, and power arrangement.
The ProSoft AN-X2-AB-DHRIO EtherNet/IP to Remote I/O or DH+ Gateway may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
ProSoft AN-X2-AB-DHRIO EtherNet/IP to Remote I/O or DH+ Gateway Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ProSoft AN-X2-AB-DHRIO EtherNet/IP to Remote I/O or DH+ Gateway Specs
General
- ManufacturerProSoft Technology
- ModelAN-X2-AB-DHRIO
- ConditionNew Original ready stock
- Product FamilyAN-X2 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Legacy network migration functions
- Operating Modes: Drive, HMI, Remote I/O Scanner, DH+, Flex I/O Scanner.
- Remote I/O / DH+ Rates: 57.6, 115.2, or 230.4 kbaud.
- Remote I/O Capacity: Up to 32 racks.
- HMI Capacity: Up to 8 PanelViews.
Data and connection limits
- Drive Capacity: Up to 4 EtherNet/IP drives.
- Flex I/O Capacity: Up to 16 EtherNet/IP connections.
- Ethernet Port: 1 RJ45; 10/100 Mbps.
- Network Connector: 1 Phoenix 3-pin connector.
Setup and commissioning resources
- Typical Power Consumption: 200 mA at 12 VDC or 100 mA at 24 VDC.
- Operating Temperature: 0 to 50 °C.
- Relative Humidity: 5% to 95%, non-condensing.
- Mounting: Desktop or DIN rail.