Features:
- Up to 30 Modbus TCP/IP clients
- Reduced ControlLogix I/O data image
- Ethernet configuration and remote diagnostics
MVI56E-MNETCR is the reduced-data-block Multi-Client module intended for a ControlLogix remote chassis that must initiate Modbus TCP/IP requests.
Its client resources support communication with multiple servers while the reduced backplane image limits the amount of data exchanged with the controller on each update.
Check remote-rack architecture, 1756 slot and power capacity, client target addresses, command scheduling, and the reduced data mapping before deployment.
The ProSoft MVI56E-MNETCR Modbus TCP/IP Multi-Client Enhanced Communication Module for Remote Chassis is listed as Active / Available from OEM. Apter Power can review remote-chassis compatibility and documentation.
ProSoft MVI56E-MNETCR Modbus TCP/IP Multi-Client Enhanced Communication Module for Remote Chassis Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ProSoft MVI56E-MNETCR Modbus TCP/IP Multi-Client Enhanced Communication Module for Remote Chassis Specs
General
- ManufacturerProSoft Technology
- ModelMVI56E-MNETCR
- ConditionNew Original ready stock
- Product FamilyControlLogix Communication Module
Remote-rack use cases
- Remote chassis: MVI56E-MNETCR is designed for installation in a ControlLogix remote chassis.
- Multi-server polling: Up to 30 Modbus TCP/IP clients can collect or write data across many server devices.
- Reduced image: The reduced ControlLogix I/O image suits systems that do not require the full standard transfer block.
- Controller exchange: Mapped data passes between client commands and the ControlLogix backplane.
Client command handling
- Client resources: Each configured client maintains its own target connection and command activity.
- Command definition: Function code, server address, register location, quantity, and polling behavior are set per command.
- Ethernet link: A 10/100 Base-T RJ45 port carries Modbus TCP/IP and configuration traffic.
- CIPconnect access: Diagnostics can be reached through supported bridged Rockwell Automation network paths.
Operational monitoring
- Front display: The four-character display reports module, address, port, and error information.
- Status data: Client states, command errors, and communication counters support fault isolation.
- Configuration access: ProSoft Configuration Builder provides online diagnostics through Ethernet.
- Physical checks: Review link LEDs, rack status, backplane power, and target reachability before changing command logic.