- Match the W0018, B-ET and EC configuration by complete type code
- Restore the approved Multi-Ethernet protocol and controller data layout
- Retain an external machine safety design because the safety option is NN
HCS01.1E-W0018-A-03-B-ET-EC-NN-NN-NN-FW is a Bosch Rexroth IndraDrive Cs compact converter for one servo axis.
It combines the 200–500 V three-phase mains class with Basic control, ET Multi-Ethernet and EC multi-encoder feedback; no integrated safety option is specified.
Confirm the network project, motor and encoder, external safety chain, firmware and switching-frequency duty before operation.
Availability, condition, price, and shipping time for HCS01.1E-W0018-A-03-B-ET-EC-NN-NN-NN-FW are confirmed during quotation.
Bosch Rexroth HCS01.1E-W0018-A-03-B-ET-EC-NN-NN-NN-FW IndraDrive Cs Resources and Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Identify the active ET protocol from the approved machine project
- Restore network identity, cyclic data layout and controller timing
- Do not infer control readiness from link status alone
- Select an EC-supported encoder and the correct feedback cable
- Separate feedback wiring from motor conductors and bond shields correctly
- Verify encoder direction and commutation before applying load
- Use continuous-current limits for the selected switching frequency
- Maintain the specified mounting position, clearance and cabinet airflow
- Validate the external safety chain because this configuration has no integrated safety option
- 18 A single-axis service on 200–500 V three-phase mains
- Basic-control axes requiring ET Multi-Ethernet and EC multi-encoder feedback
- Installations that provide safety externally because this exact NN configuration has no integrated safety option