- Order HCS02.1E-W0054-A-03-NNNN against Bosch Rexroth material R911298373
- Size the axis for 20.6 A continuous current and the documented 54 A maximum-current class
- Select the control section, firmware, mains choke, braking path and external control supply as separate system items
HCS02.1E-W0054-A-03-NNNN is the Bosch Rexroth IndraDrive C converter power section identified by material R911298373.
It accepts 200–250 V single-phase or 200–500 V three-phase mains and supplies one motor axis, with 20.6 A continuous current and power ratings that depend on the assigned mains choke.
Because this HCS02 code identifies the power section rather than a complete control-section configuration, replacement requires a separate check of the installed control section, firmware, external 24 V control supply, DC-bus arrangement and braking components.
Availability, condition, price, and shipping time for HCS02.1E-W0054-A-03-NNNN are confirmed during quotation.
Bosch Rexroth HCS02.1E-W0054-A-03-NNNN IndraDrive C Resources and Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Confirm material R911298373 and the full HCS02 type code
- Match the separate control section and approved firmware
- Verify connectors, motor cable and cabinet position before fitting
- Confirm the approved single- or three-phase mains design
- Apply the documented mains choke and EMC components
- Check DC-bus links and braking-energy path before power-up
- Restore motor, encoder, current and switching-frequency data
- Verify direction, limits and controlled braking
- Review overload, DC-bus, thermal and communication diagnostics
- Single-axis IndraDrive C power-section service requiring the HCS02 54 A class
- Systems operating from 200–250 V single-phase or 200–500 V three-phase mains with the assigned choke and protection
- Retrofits that retain or separately select a compatible control section, firmware, DC-bus and braking configuration