- Size the axis from RMS and peak duty at the selected switching frequency
- Match HS32-01, SERCOS project, HSM firmware and every configured plug-in module
- Verify supply-module capacity for this axis and all simultaneous DC-bus loads
HDS03.2-W075N-HS32-01-FW is a Bosch Rexroth DIAX04 HDS drive controller with a 75 A current class and SERCOS communication.
Its continuous-current capability depends on switching frequency, while the HS32-01 configuration and HSM firmware must agree with the installed axis.
Confirm supply capacity, feedback, optional modules, cooling and the saved project before returning the machine to service.
Availability, condition, price, and shipping time for HDS03.2-W075N-HS32-01-FW are confirmed during quotation.
Bosch Rexroth HDS03.2-W075N-HS32-01-FW DIAX04 Drive Controller Product Family and Support Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Use RMS current, peak duty and cycle time rather than housing size alone
- Apply the correct continuous-current limit for 4 or 8 kHz operation
- Include ambient, altitude and neighboring heat in the thermal check
- Match encoder type, polarity and scaling to the motor and saved project
- Inspect feedback connectors, cable shielding and mechanical coupling
- Verify actual position at low speed before restoring production motion
- Restore every configuration-plate plug-in module to its documented U slot
- Confirm SERCOS ring phase and HSM firmware before enabling the axis
- Monitor DC-bus demand and temperature through the real machine cycle
- Machine-tool feed and positioning axes
- Textile-machine synchronized motion axes
- Packaging-machine servo axes on a SERCOS ring