- Match the DKC02.3 SERCOS and voltage-class identity exactly
- Preserve firmware, SERCOS and axis parameters before removal
- Verify mains, DC-bus, braking and motor-feedback compatibility before enable
Bosch Rexroth DKC02.3-040-7-FW is a 40 A ECODRIVE03 drive controller with SERCOS interface for single- and multi-axis motion systems.
Bosch Rexroth DKC02.3-040-7-FW is a 40 A ECODRIVE03 drive controller with SERCOS interface for single- and multi-axis motion systems. DKC02.3 specifies ECODRIVE03 SERCOS command communication; 040 is the current class, 7 the voltage class and FW means the firmware is ordered separately.
Before installation or replacement, verify the complete nameplate, compatible companion hardware, wiring or network design, saved configuration and commissioning plan.
Availability, condition, price, and shipping time for DKC02.3-040-7-FW are confirmed during quotation.
Bosch Rexroth DKC02.3-040-7-FW ECODRIVE03 SERCOS Drive Controller Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Restore optical ring direction, node address and cycle time
- Confirm the master reaches the intended communication phase
- Match firmware and axis data to the SERCOS project
- Verify approved 200 to 480 VAC mains arrangement
- Check DC bus, fuses, choke, EMC and braking components
- Confirm protective earth, motor cable and holding-brake wiring
- Validate encoder recognition and motor data
- Test brake release, direction and travel limits at low risk
- Prove controlled deceleration and diagnostic recovery
- ECODRIVE03 machine-tool and positioning axes
- SERCOS packaging and material-handling machines
- Printing and converting machinery with coordinated motion